Pieces for the shelf, the sideboard and the windowsill — decoration that reads as designed rather than printed.
145 posts
A dripping wax skull built for an LED tealight, dark from every side and ready to glow on your desk or shelf once Halloween rolls around.
Read moreA taller, quirkier cousin of the original Pumpkin Buddy, this butternut-shaped character prints with no supports and comes in two fun versions to choose from.
Read moreA cheerful little pumpkin character for Halloween, free to download in two versions, one with arms, one with posable print-in-place legs you can sit anywhere.
Read moreOpen this pear and find a pile of skulls inside. A two-size Halloween figure with a multicolor or single-color build and a separate stem you glue on last.
Read moreA desk box shaped like a sardine tin, sliding lid and all, built to keep paper clips, pins and small tools in one playful spot instead of scattered across your desk.
Read moreA garlic bulb that looks ordinary until you notice what's packed inside it. This skull garlic 3D print is a free Halloween file with a genuinely creepy twist.
Read moreA butternut-shaped pumpkin with a perforated Voronoi surface that glows from within. Print it in parts, drop in an LED tealight, and set it out for fall.
Read moreA skull-faced pumpkin wrapped in sharp Voronoi flames, built to hold an LED tealight and throw light through every opening once it's lit.
Read moreA skull wrapped in flowing pumpkin ribs, built to hold a tealight and throw warm light through every gap once the room goes dark.
Read moreA skull hides inside this Voronoi-cut pumpkin, and once a tealight goes in through the screw cap, the whole shape glows from within.
Read more1 person likes this design
A twisted chili pepper hiding tiny skulls inside, made to print in parts and glue together. A strange, sinister centerpiece for any Halloween shelf.
Read moreA curved silhouette wrapped in twisted rope texture, this free pumpkin joins four earlier versions to round out a full autumn display without needing an AMS setup.
Read moreA wider, flatter pumpkin with the same twisted-rope texture as the earlier versions, free to print in one color or split into a two-color stem-and-body set.
Read moreA skeleton hidden beneath a heavy, worn robe, ribs and skull exposed beneath flowing fabric folds. A quietly unsettling piece for a Halloween shelf, desk, or horror collection.
Read moreThis carved pumpkin lights up from within, glowing warm orange through its eyes, nose and mouth once you drop in an LED tealight and switch off the room lights.
Read moreA padded, quilted-look paper towel holder that fits standard rolls and turns an everyday kitchen object into something worth printing more than once.
Read moreA small snail hauling a big pumpkin on its shell, ready to print as one piece or in parts you glue together for a full-color fall display.
Read more1 person likes this design
A fierce dragon carved from wood-textured detail, wings spread and claws bared. This wood dragon sculpture STL brings a fantasy centerpiece to any desk, shelf or collection.
Read moreA twisted rope texture over a classic butternut shape, free to download, easy to print in one piece or with a separate stem for a two-color look.
Read moreA pineapple that looks ordinary from behind and hides a cluster of skulls up front. Two sizes, a separate crown, and plenty of room to play with color.
Read moreA pumpkin that melts down onto the surface instead of sitting round and tidy. Two easy parts, no multicolor printer needed, glue and go for shelves or Halloween tables.
Read moreA tealight holder shaped like softly draped fabric, floating around the flame. Three heights, two fit styles, and a warm glow that looks its best once the room goes dark.
Read moreA cozy rope-textured pumpkin you can print in one color or two, no AMS required, and it costs nothing to download and try on your own printer.
Read moreA tiny bandaged elephant with big black eyes joins the Buddy lineup, built to print in one color with the eyes added afterward.
Read more2 people like this design
A skull wrapped in flowing flames, sculpted to look different from every angle. This flaming skull sculpture 3D print brings a dark, dramatic centerpiece to any desk or shelf.
Read more1 person likes this design
Meet an angry little ghost who holds your LED tealight while looking thoroughly unhappy about it. Flowing fabric folds, creepy separate eyes, and a warm glow that changes his whole mood once lit.
Read more3 people like this design
A twisted rope texture turns the classic pumpkin shape into something that looks hand-knotted, print it whole or in two colors, and set it out for fall.
Read moreA small arch-shaped shelf you print, assemble and style your own way, with doors, decor panels and inlets to mix and match for whatever you want to show off.
Read moreA skull-faced bowl with curved horns and cracked, bone-like texture, made to hold your keys and look good doing it. Part decor, part desk tool.
Read moreA vase carved digitally to look like real wood grain and roots, scaled to fit your space or your printer, and free to download for anyone who wants a warm, organic piece on their shelf.
Read moreA dragon head pen holder and a clawed catch-all tray, both carved with scales and horns, ready to turn a plain desk into a small dragon lair.
Read moreA three-piece dining organizer with a ribbed, minimal look, made to sit permanently on the table and keep napkins and cutlery in order.
Read moreThe KASMO E27 Pendant Lamp brings the same curved, perforated shade you know from the E14 version into a size built for the widely used E27 socket and bulb.
Read moreA ghost that gave up haunting for holding candy. This sculptural bowl watches over your treats with a flowing, fabric-like shape that wraps the whole piece.
Read moreA small ghost hiding under a quilted blanket, printed in two parts and glued together, no AMS or multicolor setup required for a cheerful Halloween shelf piece.
Read moreA grumpy little ghost caught mid-prayer, floating above its own base. Print the parts separately, glue them together, and it's ready for your Halloween shelf.
Read moreTwo spirits with attitude, angry eyes and an unmistakable hand gesture, made to glow from an LED tealight. Print them in black, white, or build a whole rude ghost army for your shelf.
Read moreA pumpkin blasted open from the inside, glowing from an LED tealight tucked behind a screw-cap lid. Jack-O-Blast trades the classic grin for something a lot more dramatic.
Read moreCloudy looks like a stitched cushion but it's fully 3D printed, a soap dispenser with deep seams and a soft padded surface for the bathroom or kitchen sink.
Read moreA screaming pumpkin tealight holder with a stretched, howling face that lights up from inside. Once you drop in an LED tealight, the eyes and mouth glow through the dark like something out of a horror movie.
Read moreCUSHORA pairs a cactus silhouette with a padded cushion base, giving you a jewelry organizer that looks soft but prints solid and holds up on any dresser.
Read moreA skull wrapped in bandages, hollowed out into a bowl for candy and treats. This one earns a spot on the table well before the trick-or-treaters arrive.
Read moreA small knitted-beanie ghost that holds your pen and grins at your monitor all day. Print it in one go with an AMS or build it from separate parts and glue it together yourself.
Read moreOne pumpkin, two dark faces staring back at you. Turn it around and the skull gives way to a dragon-like creature, no AMS or multicolor printer needed to pull off the contrast.
Read moreA cheeky little ghost flipping double birds, wearing a knitted beanie with a pom-pom. Free to download, easy to print, and guaranteed to get a reaction from whoever spots it on your desk.
Read moreA layered, mountain-shaped headphone stand with a built-in tray for earbuds, keys and cables. Four printed parts, three dowel pins, and a finish worth showing off on your desk.
Read moreA crouched black dragon with folded wings and an armored tail, ready to guard a shelf or desk. See what makes this sculpture worth the print time.
Read moreA fallen dragon's skull, horns and weathered bone in one striking bust. Two parts click together, ready for bone white, stone gray, or your own paint job.
Read moreOMNI pairs a glowing perforated shade with a storage tray built right into the base. Print it in your choice of two bases and give your desk a warm little upgrade.
Read more1 person likes this design
JIMBO pairs a ribbed planter with a warm wooden-look stand, built from two interlocking parts for a stable base that fits any windowsill or shelf.
Read moreA pen holder that trades plain cylinders for texture, with four surface patterns and two base options so you can pick the fit and the finish that suits your desk.
Read moreA modular mini shelf you print and assemble yourself, with doors, bubble decor, and inserts to arrange collectibles, plants, and jewelry exactly the way you want.
Read moreA rounded desk clock with a built-in pen holder, printed in clean Japandi lines and finished with a real clock mechanism. Free files, simple assembly, and a look that suits any desk.
Read moreThe KASMO pendant lamp turns a printed shade into a warm light feature for your dining table or reading corner, with a spiral cut that lets light spill through in patterns.
Read moreA wine bottle holder that plays a quiet trick on the eye, angled just enough to make the bottle look like it's floating on your counter or shelf.
Read moreA calm, ribbed water feature you print in two sizes and pair with a solar floating fountain. Free STL files, a foam cutting template, and a clean Japandi look for your balcony or garden table.
Read moreA dragon that guards your books instead of just sitting on a shelf. This detailed sculpture works as a real book stand, alone or printed as a pair.
Read moreA glowing gateway between two worlds, sized for a desk or shelf. Print the twisted core, snap in a lamp kit, and watch it come alive in warm white or shifting color.
Read moreA clean cylindrical paper towel holder with a textured side detail, made to sit out in the open on your counter. Comes in two versions and prints ready for daily kitchen use.
Read moreA sitting giraffe rebuilt as an open Voronoi lattice, casting shadow and light through its own body. A quiet, modern statement piece for a shelf, desk or sideboard.
Read moreA textured, curved kitchen roll dispenser that holds its roll steady and grabs a sheet without fuss. Print it in black, red, or white and see how it sits on your counter.
Read moreA modern tripod lamp with a woven-look shade you print in three parts and light up yourself. It brings warm, ambient glow to any desk or shelf without much fuss.
Read moreA dragon head with its jaws open, ready to hold your keys by the door. Printed as one solid piece, this wall mount brings a bit of dark fantasy to any entryway or workshop.
Read moreA ribbed tealight holder that throws soft shadows lit or unlit, prints in two parts, and screws together over hidden storage for the candle itself.
Read moreA frog shape reimagined as an open Voronoi shell, light from every angle and striking in matte black. Here is what to know before you print one.
Read moreThomas the bulldog sits on his own brick wall base, hoodie on and coffee in hand, ready to bring some attitude to a desk that badly needs it.
Read moreA woven-pattern tealight holder that throws soft light through its texture, assembled from just three printed parts with a screw-in thread connection and an optional top cover.
Read moreA dark, scaled dragon with massive wings and a fierce pose, made for collectors who want a display piece with real presence on the shelf or desk.
Read moreA squirrel silhouette opened up into a Voronoi lattice, this sculpture turns a familiar shape into something you'll want to display, not just look at.
Read moreA bulldog rebuilt from open Voronoi cells, printable in resin or FDM, ready to scale up for a striking shelf or desk display.
Read moreA dragon built to look mean on a shelf — spiked armor, wide wings, and a pose that leans forward like it's about to move. Here's what makes it worth the filament.
Read moreA leaf-shaped perpetual calendar you print once and reset every morning, with sliding rings for weekday, date, and month, plus two base styles to pick from.
Read moreA paw-shaped wall hook for leashes, collars and keys, with a printed screw and a pad you can personalize with your dog's name before it goes up by the door.
Read moreA dark, sculptural ram skull planter with curved horns and ornamental detail, made to hold succulents or cacti and sit as a statement piece on any shelf or desk.
Read moreTwo electric grinders, one clean stand. This spice grinder organizer keeps salt and pepper mills upright, steady, and off a cluttered countertop for good.
Read moreA compact desk organizer tray 3D print with a textured outer shell and a removable ribbed inlet, made from just six parts you print, press-fit, and screw together.
Read moreBasim is a modular countertop organizer with a hidden drip tray, ribbed sides, and two inlet options, ready to print for the bathroom, kitchen, or desk.
Read moreA cracked eggshell cup standing on little dinosaur feet, made to hold your morning egg and make people smile while they eat it.
Read moreA clip-lid storage container that clicks shut in one motion, printable in 28 sizes with optional labels and rubber studs for grip.
Read moreA hinged box that comes off the plate ready to use, no glue, no screws. Fits Gridfinity inlays and works just as well as a standalone container for your desk or workshop.
Read moreHITAMO is a ribbed toilet paper organizer that hides a standard roll behind a clean lid, prints without supports, and clicks together in minutes.
Read moreA dual-roll toilet paper storage box with a click-in lid and two cover styles, made to sit quietly in a modern bathroom and hold everything out of sight.
Read moreMeet Varnok, a skull book stand that looks like it crawled out of a forgotten crypt to hold your paperback. Bone-like ribs, a hollow stare, and a base sturdy enough for real reading.
Read moreTwo carved dragon heads face off on your desk, one holding your pens, the other your keys and coins, both cast from the same fantasy sculpt.
Read moreWings raised, jaws open, body low to the ground — this aggressive dragon captures the moment before the strike, ready to become the centerpiece of any dragon collection.
Read moreA cracked eggshell on two little legs, caught mid-escape. This Easter egg figurine comes with two leg styles you can plug in and swap, easy to print and fun to give away.
Read moreA ribbed, softly sculpted bunny with movable legs, offered in two sizes and two versions, ready to sit on a shelf or spring table this Easter.
Read moreA rose that plugs together without glue or AMS, with a version that hides a small compartment inside the pot for a ring or a quiet note.
Read moreA modular container that sorts pens, tools, or kitchen gear into four compartments, with a textured shell and a stable base built to sit still on any smooth surface.
Read moreA square-edged organizer you print once and rearrange forever, swapping inlets to fit office supplies, workshop tools, or kitchen odds and ends without reprinting the shell.
Read moreA modular desk organizer 3D print that swaps inlets without reprinting the shell, with a ribbed exterior that turns ordinary print lines into part of the design.
Read moreOne outer shell, four interchangeable inlets, endless configurations. This modular organizer swaps compartments without reprinting the shell, and its ribbed surface hides layer lines on purpose.
Read moreA ribbed vase 3D print with clean geometry and a soft, modern surface, made for flowers or as a standalone piece on any shelf or table.
Read moreA pint-sized dragon with big eyes and bat wings, made to sit on your desk or shelf and bring a bit of fantasy into an ordinary corner of your home.
Read moreA click-lock case that prints fully assembled, with three swappable inlets so one shell becomes a pencil case, a tool box, or an EDC organizer.
Read moreA hinged box that snaps shut and locks onto a gridfinity base, sized to fit small bathroom cabinets and keep loose essentials in one place.
Read moreA stackable desk organizer that grows with your desk, one press-fit section at a time. Pick your inlets, pick your surface, and print the layout that actually fits how you work.
Read moreA demon skull catchall with curling horns, ready to guard your keys, earbuds and loose coins. Here's what the skull catchall bowl 3D print looks like on your desk and how it prints.
Read moreThree clean planter shapes, one clever inlet that keeps roots off the base, and a print that needs no supports at all. Pick smooth, chevron or diagonal for your shelf.
Read moreA modular herb pot holder built for the herb pots you already buy at the supermarket, with a drip tray that keeps water off the counter and a click-in assembly that takes seconds.
Read moreA watering can shaped to sit comfortably in your hand and pour without mess, printed support free and ready in three different styles for your plants.
Read moreA minimal desk organizer that adapts to whatever needs tidying, from pens to jewelry to spare screws, with nine sizes ready to print and more on request.
Read moreA countertop paper towel holder called KAMI, printed in two sizes with a ribbed grip finish, ready for PLA or PETG and beginner-friendly from the first layer.
Read moreA little egg holder that stands on chicken legs or bunny legs, ready for the breakfast table this Easter. Pick your favorite and print it in one color or several.
Read moreA clean two-part tissue box that clicks together in seconds, hides a standard toilet paper roll, and prints without supports on almost any bed size.
Read moreCoasters shaped like chocolate bars, plus a holder to keep them tidy. A cozy detail for a coffee table or kitchen counter, and simple enough to print in an afternoon.
Read moreA small turtle-shaped lamp with a Voronoi shell that scatters warm light across the room, easy enough to print as a first supported model.
Read moreA sculptural wave pen holder that doubles as a modular desk organizer, printable as a single cup or joined into a pair with a centering chamfer.
Read moreSince joining Sektor 7 Studios, I’ve been having an absolute blast creating your models! Every file has been top‑tier quality, super fun to work with, and consistently inspiring. I’m genuinely thrilled with your products and can’t wait to print even more of your amazing designs.
Tim COMMUNITY
I have found your designs wonderful, and im looking forward to introducing them into a store once I get up and running
Aaron PATREON MEMBER
Really impressed with these designs from Sektor7! I have been printing their clean, simple prints with zero issues. No supports needed on any of them, which made the whole process painless. I loved that the files gave the option to print in separate colors or all-in-one using my AMS , nice flexibility depending on how you want to finish them. Detail held up well straight off the printer and everything fit together exactly as intended. Will definitely be printing more as the variety and quantity of designs available is impressive.
Rachel PATREON MEMBER
Share this review
Instagram story: download the image, then add it to your story in Instagram. On your phone, the share button opens Instagram directly.
5.0 out of 53 reviews
Explore all community reviewsEvery model we have ever posted, arranged into our logo.
See the mosaicModern Design, 3D-Printing & STL-Files
Welcome! Pick a nickname – it is the name under your comments.
Saved.
Sign in to comment, rate models and keep your favourites across devices. Your password never touches this site.
Waiting for Thangs – click Allow in the window that just opened.
Sign-in is not open yet. It is coming soon.
Loading your comments…
No comments yet – say hello under any model.
Find all Sektor 7 designs on your favourite platform.
Nothing here yet.
Nothing here yet.
Thangs needs your email address to find your account.
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
