Christmas tree tealight STL: a cozy, reliable set of four

Four abstract tree designs with star toppers, ready for LED tealights

4 min read
Christmas tree tealight STL: a cozy, reliable set of fourWe print every model ourselves. This render shows the original model exactly as it comes off the printer - only digitally staged.
Contents
  1. What a christmas tree tealight STL looks like once it’s lit
  2. Four designs, one set
  3. Can this replace a traditional Advent wreath?
  4. Printing notes and the LED question
  5. Where it fits in a holiday setup

Welcome to another trip through the Sektor 7 workshop. The Christmas tree tealight STL is today's stop, and we are looking at the idea, the design choices, and the details that bring the whole thing together.

A christmas tree tealight STL set doesn’t have to mean the same pine-shaped silhouette everyone else is printing this December. This collection takes the idea of the tabletop Christmas tree and strips it down to abstract surface pattern alone: four trees, four textures, no two alike, each one designed so the shape itself becomes the decoration once there’s a light behind it.

The starting point was simple enough. White filament, a warm LED tealight, and a small golden star on top. From there, each design explores a different way of breaking up the cone shape, some with flowing waves across the surface, others with sharper geometric facets. The surface treatment is really the whole point of the design, since it’s what catches and scatters the light once a tealight is burning inside.

What a christmas tree tealight STL looks like once it’s lit

Printed in white, the trees read as soft, almost paper-like forms during the day. At night, with an LED tealight inside, the texture takes over. Waves and facets catch the light unevenly, so each tree throws its own pattern of brightness and shadow rather than glowing as one flat shape. The golden star topper adds a small warm accent at the peak, screwed on rather than glued, which also means the whole piece can be taken apart for printing and reassembled afterward.

Four designs, one set

Because there are four distinct patterns, you don’t have to commit to printing just one. Each design stands on its own as a single piece on a windowsill or shelf, but they were clearly made to be seen together. Line up all four trees and the different textures start to play off each other, especially once they’re all lit at the same time. It’s a different approach from a single statue-style tree repeated four times.

Can this replace a traditional Advent wreath?

Grouping the four trees together works as a stand-in for a traditional Advent wreath, and that was suggested directly as a way to display the set. Arrange them on a tray with some greenery, pinecones, and a few ornaments tucked between them, and you get a centerpiece that’s lit from within rather than from candles on top. It reads as more modern than a classic wreath but still hits the same note of warm, seasonal lighting on a table or sideboard.

Printing notes and the LED question

White PLA is the recommended filament, chosen specifically because it diffuses the LED light softly rather than letting it shine through as a harsh point. That said, the design is also described as good for experimenting with different filament colors, so there’s room to try a design in another shade if you want something other than the classic white-and-gold look. The base has a removable screw cap, which is there specifically so an LED tealight can be dropped in and swapped out without any fuss.

One thing worth repeating plainly: these are built for LED tealights only. There’s no ventilation or heat consideration here for an open flame, and using a real candle isn’t what the design was made for.

Where it fits in a holiday setup

A single tree works fine as a small accent piece on a desk or windowsill, something to switch on in the evening without taking up much space. The full set of four earns its place as a centerpiece rather than a side decoration, especially grouped on a tray for that Advent-style arrangement. It also works as a handmade gift if you print just one or two designs and gift them individually, since each tealight holder stands fine on its own without needing the full set to make sense.

If you’re deciding which of the four to print first, there isn’t a wrong answer here since all four share the same base mechanism and lighting behavior. The real difference is just which textured surface catches your eye, and that’s going to come down to taste more than function.

We will call this one finished before we accidentally add another feature to it. Thanks for checking out the Christmas tree tealight STL, happy printing, and keep an eye on the studio for what comes next.

Leon Sektor 7 Studios

Real photos

3 photos of the printed model

Get this model

Every model is available as STL and 3MF files. Selling physical prints needs a commercial license; the files themselves may not be resold. Part of our library of 400+ models – every one included from $10 a month.

Recommended Print Settings

The settings and the filament we used for our own print of this model, and the combination that gave us the best result. A recommendation, not a requirement.

Filament
Bambulab PLA Matte white, Bambulab PLA Silk gold
Infill
8% Gyroid or Grid
Layer Height
0.2mm
Walls
2
Nozzle Size
0.4mm
Support Structure
none needed!
Brim
None needed, but when you have adhesion problems than activate the brim
Skirt Loops
1

Tags

Join the conversation

Loading comments…

More from this collection