Ghost under blanket, a cheerful easy Halloween print

The ghost under blanket print takes the old bedsheet-ghost joke and gives it a soft, quilted surface instead of a smooth one, which is what makes it read as cozy rather than scary from across a room.

The idea behind the design

The shape leans on a look everyone recognizes: a ghost hiding under a blanket, two eye holes poking through the fabric. What sets the ghost under blanket apart from a plain sheet-ghost is the quilted texture worked into the blanket surface, giving the print a fabric-like feel instead of a flat, featureless dome. The eyes are a separate piece, glued into place after printing, so you get a clean two-color look without needing a multicolor printer or an AMS setup at all.

That eyes-and-body split is a small decision with a real payoff. Anyone with a single-extruder printer can still get contrast between the white (or colored) body and the dark eyes, just by swapping filament for one small part and gluing it on afterward. Sektor 7 Studios recommends superglue for the job, which tells you the eyes are meant to be a quick, permanent attachment rather than something you fuss over with pins or paint.

Ghost under blanket printing notes

Both the original announcement and the model page describe this as an easy, beginner-friendly print. It’s listed as support-free, which keeps post-processing down to separating two parts and gluing the eyes in place. No AMS is needed, and no multicolor printing is required, so the ghost under blanket prints the same on a basic single-nozzle machine as it would on anything fancier. The quilted blanket texture is built into the model itself rather than added through painting or filament swaps mid-print, so the detail shows up straight off the plate with no extra work.

This matters most for anyone who has been holding off on multicolor Halloween prints because they don’t own an AMS unit or don’t want to deal with color-change waste. Here the two-color effect comes entirely from a glued-on part, which is a much simpler workaround, and one that a lot of seasonal decorations don’t bother offering.

Color choices and where it sits

The obvious route is classic white, which keeps the ghost-under-a-sheet reading intact and matches the reference look most people expect. But because the body and eyes print and glue separately, nothing stops you from trying other colors for the blanket if you want it to match a broader Halloween display rather than stand alone. A few printed in different shades would sit well together on a shelf or windowsill as a small themed set, each one still recognizably the same ghost under blanket design underneath.

Scale-wise this reads as a desk or shelf piece rather than a display centerpiece: something you’d tuck next to a lamp, on a windowsill, or into a Halloween tablescape alongside other small seasonal prints. It also works as a quick gift for someone who wants a bit of Halloween on their desk without a large or fragile decoration to find room for. The small footprint means it doesn’t compete for space the way a bigger prop would.

Part of the Halloween Collection

The ghost under blanket belongs to the Sektor 7 Studios Halloween Collection, a running set of seasonal prints built with the same easy-print, low-fuss approach: minimal supports, simple assembly, and designs that don’t demand a multicolor printer to look right. If this one earns a spot on your desk, the rest of the collection is worth a look for the same reason, since the pieces are made to the same easy standard and slot into the same kind of small seasonal display.

The model is free to download from Thangs, Patreon and MakerWorld, with STL files and predefined 3MF profiles for Bambu Lab printers both available. The predefined profile is worth using if you’re new to the model, since it removes guesswork around getting the quilted texture to print cleanly on the first try. For anyone stocking up on small Halloween prints this season, the ghost under blanket is a low-commitment one to start with: quick to print, easy to assemble, and forgiving of whatever printer happens to be running.