74 posts
A taller, quirkier cousin of the original Pumpkin Buddy, this butternut-shaped character prints with no supports and comes in two fun versions to choose from.
Read moreOpen this pear and find a pile of skulls inside. A two-size Halloween figure with a multicolor or single-color build and a separate stem you glue on last.
Read moreA desk box shaped like a sardine tin, sliding lid and all, built to keep paper clips, pins and small tools in one playful spot instead of scattered across your desk.
Read moreA skull-faced pumpkin wrapped in sharp Voronoi flames, built to hold an LED tealight and throw light through every opening once it's lit.
Read moreA skull wrapped in flowing pumpkin ribs, built to hold a tealight and throw warm light through every gap once the room goes dark.
Read moreA skull hides inside this Voronoi-cut pumpkin, and once a tealight goes in through the screw cap, the whole shape glows from within.
Read moreA wider, flatter pumpkin with the same twisted-rope texture as the earlier versions, free to print in one color or split into a two-color stem-and-body set.
Read moreThis carved pumpkin lights up from within, glowing warm orange through its eyes, nose and mouth once you drop in an LED tealight and switch off the room lights.
Read moreA padded, quilted-look paper towel holder that fits standard rolls and turns an everyday kitchen object into something worth printing more than once.
Read moreA small arch-shaped shelf you print, assemble and style your own way, with doors, decor panels and inlets to mix and match for whatever you want to show off.
Read moreA vase carved digitally to look like real wood grain and roots, scaled to fit your space or your printer, and free to download for anyone who wants a warm, organic piece on their shelf.
Read moreA three-piece dining organizer with a ribbed, minimal look, made to sit permanently on the table and keep napkins and cutlery in order.
Read moreThe KASMO E27 Pendant Lamp brings the same curved, perforated shade you know from the E14 version into a size built for the widely used E27 socket and bulb.
Read moreCloudy looks like a stitched cushion but it's fully 3D printed, a soap dispenser with deep seams and a soft padded surface for the bathroom or kitchen sink.
Read moreCUSHORA pairs a cactus silhouette with a padded cushion base, giving you a jewelry organizer that looks soft but prints solid and holds up on any dresser.
Read moreA layered, mountain-shaped headphone stand with a built-in tray for earbuds, keys and cables. Four printed parts, three dowel pins, and a finish worth showing off on your desk.
Read moreOMNI pairs a glowing perforated shade with a storage tray built right into the base. Print it in your choice of two bases and give your desk a warm little upgrade.
Read more1 person likes this design
JIMBO pairs a ribbed planter with a warm wooden-look stand, built from two interlocking parts for a stable base that fits any windowsill or shelf.
Read moreA pen holder that trades plain cylinders for texture, with four surface patterns and two base options so you can pick the fit and the finish that suits your desk.
Read moreA modular mini shelf you print and assemble yourself, with doors, bubble decor, and inserts to arrange collectibles, plants, and jewelry exactly the way you want.
Read moreA rounded desk clock with a built-in pen holder, printed in clean Japandi lines and finished with a real clock mechanism. Free files, simple assembly, and a look that suits any desk.
Read moreThe KASMO pendant lamp turns a printed shade into a warm light feature for your dining table or reading corner, with a spiral cut that lets light spill through in patterns.
Read moreTwo trays, one handle, one clean shape. The OSAM tiered stand organizer moves from kitchen counter to dining table and holds its own in either spot.
Read moreA wine bottle holder that plays a quiet trick on the eye, angled just enough to make the bottle look like it's floating on your counter or shelf.
Read moreA calm, ribbed water feature you print in two sizes and pair with a solar floating fountain. Free STL files, a foam cutting template, and a clean Japandi look for your balcony or garden table.
Read moreA dragon that guards your books instead of just sitting on a shelf. This detailed sculpture works as a real book stand, alone or printed as a pair.
Read moreA glowing gateway between two worlds, sized for a desk or shelf. Print the twisted core, snap in a lamp kit, and watch it come alive in warm white or shifting color.
Read moreA sitting giraffe rebuilt as an open Voronoi lattice, casting shadow and light through its own body. A quiet, modern statement piece for a shelf, desk or sideboard.
Read moreA textured, curved kitchen roll dispenser that holds its roll steady and grabs a sheet without fuss. Print it in black, red, or white and see how it sits on your counter.
Read moreA modern tripod lamp with a woven-look shade you print in three parts and light up yourself. It brings warm, ambient glow to any desk or shelf without much fuss.
Read moreA dragon head with its jaws open, ready to hold your keys by the door. Printed as one solid piece, this wall mount brings a bit of dark fantasy to any entryway or workshop.
Read moreA ribbed tealight holder that throws soft shadows lit or unlit, prints in two parts, and screws together over hidden storage for the candle itself.
Read moreA woven-pattern tealight holder that throws soft light through its texture, assembled from just three printed parts with a screw-in thread connection and an optional top cover.
Read moreA dark, scaled dragon with massive wings and a fierce pose, made for collectors who want a display piece with real presence on the shelf or desk.
Read moreA squirrel silhouette opened up into a Voronoi lattice, this sculpture turns a familiar shape into something you'll want to display, not just look at.
Read moreA bulldog rebuilt from open Voronoi cells, printable in resin or FDM, ready to scale up for a striking shelf or desk display.
Read moreA leaf-shaped perpetual calendar you print once and reset every morning, with sliding rings for weekday, date, and month, plus two base styles to pick from.
Read moreA paw-shaped wall hook for leashes, collars and keys, with a printed screw and a pad you can personalize with your dog's name before it goes up by the door.
Read moreA dark, sculptural ram skull planter with curved horns and ornamental detail, made to hold succulents or cacti and sit as a statement piece on any shelf or desk.
Read moreBasim is a modular countertop organizer with a hidden drip tray, ribbed sides, and two inlet options, ready to print for the bathroom, kitchen, or desk.
Read moreA cracked eggshell cup standing on little dinosaur feet, made to hold your morning egg and make people smile while they eat it.
Read moreA clip-lid storage container that clicks shut in one motion, printable in 28 sizes with optional labels and rubber studs for grip.
Read moreA hinged box that comes off the plate ready to use, no glue, no screws. Fits Gridfinity inlays and works just as well as a standalone container for your desk or workshop.
Read moreHITAMO is a ribbed toilet paper organizer that hides a standard roll behind a clean lid, prints without supports, and clicks together in minutes.
Read moreA dual-roll toilet paper storage box with a click-in lid and two cover styles, made to sit quietly in a modern bathroom and hold everything out of sight.
Read moreMeet Varnok, a skull book stand that looks like it crawled out of a forgotten crypt to hold your paperback. Bone-like ribs, a hollow stare, and a base sturdy enough for real reading.
Read moreA cracked eggshell on two little legs, caught mid-escape. This Easter egg figurine comes with two leg styles you can plug in and swap, easy to print and fun to give away.
Read moreA rose that plugs together without glue or AMS, with a version that hides a small compartment inside the pot for a ring or a quiet note.
Read moreA modular container that sorts pens, tools, or kitchen gear into four compartments, with a textured shell and a stable base built to sit still on any smooth surface.
Read moreA square-edged organizer you print once and rearrange forever, swapping inlets to fit office supplies, workshop tools, or kitchen odds and ends without reprinting the shell.
Read moreA modular desk organizer 3D print that swaps inlets without reprinting the shell, with a ribbed exterior that turns ordinary print lines into part of the design.
Read moreOne outer shell, four interchangeable inlets, endless configurations. This modular organizer swaps compartments without reprinting the shell, and its ribbed surface hides layer lines on purpose.
Read moreA ribbed vase 3D print with clean geometry and a soft, modern surface, made for flowers or as a standalone piece on any shelf or table.
Read moreA skull-shaped cap that turns any bottle into a gothic-romantic gift. Push it on, pick a filament color, and the whole bottle looks different in seconds.
Read moreA stackable desk organizer that grows with your desk, one press-fit section at a time. Pick your inlets, pick your surface, and print the layout that actually fits how you work.
Read moreA demon skull catchall with curling horns, ready to guard your keys, earbuds and loose coins. Here's what the skull catchall bowl 3D print looks like on your desk and how it prints.
Read moreThree clean planter shapes, one clever inlet that keeps roots off the base, and a print that needs no supports at all. Pick smooth, chevron or diagonal for your shelf.
Read moreA modular herb pot holder built for the herb pots you already buy at the supermarket, with a drip tray that keeps water off the counter and a click-in assembly that takes seconds.
Read moreA watering can shaped to sit comfortably in your hand and pour without mess, printed support free and ready in three different styles for your plants.
Read moreA minimal desk organizer that adapts to whatever needs tidying, from pens to jewelry to spare screws, with nine sizes ready to print and more on request.
Read moreA countertop paper towel holder called KAMI, printed in two sizes with a ribbed grip finish, ready for PLA or PETG and beginner-friendly from the first layer.
Read moreA clean two-part tissue box that clicks together in seconds, hides a standard toilet paper roll, and prints without supports on almost any bed size.
Read moreCoasters shaped like chocolate bars, plus a holder to keep them tidy. A cozy detail for a coffee table or kitchen counter, and simple enough to print in an afternoon.
Read moreA small turtle-shaped lamp with a Voronoi shell that scatters warm light across the room, easy enough to print as a first supported model.
Read moreA sculptural wave pen holder that doubles as a modular desk organizer, printable as a single cup or joined into a pair with a centering chamfer.
Read moreA tiny couch just the right size for your AirPods case, printed with a leather-like texture that makes it look like real furniture shrunk down for your desk.
Read moreA soft-pillow shaped stand for your AirPods that either keeps them tidy or charges them with MagSafe. Prints in two versions, no supports, and looks cozy on any desk.
Read moreA little couch for your phone, printed in one piece and shaped to look soft even though it's plastic. It fits most phones and holds them upright without wobble.
Read moreA skull opens from black rose petals on a stone base, split into three parts you plug together after printing. A quiet, gothic centerpiece for the Halloween shelf.
Read moreA skull emerging from black petals on a stone base, this gothic rose prints in three parts that simply plug together for an eerie Halloween centerpiece.
Read moreEvery inch of this pumpkin is wrapped in carved leaves instead of ridges, giving your autumn table a piece that looks handmade, not store-bought.
Read moreA pumpkin shaped like coiled rope, part fall décor, part nautical charm, easy to print and ready to sit as the centerpiece of your Halloween or Thanksgiving table.
Read moreA skull with a crown of flames, hollowed out so a tealight can flicker through the details. Made for Halloween shelves, but it earns its keep the whole year.
Read moreA ribbed vase with a clever removable insert, printed in matte black PLA for a ceramic-like finish. Two sizes, no supports, easy to keep clean.
Read moreEnd of the collection — the printer, however, is still going. More models are on the way.
Since joining Sektor 7 Studios, I’ve been having an absolute blast creating your models! Every file has been top‑tier quality, super fun to work with, and consistently inspiring. I’m genuinely thrilled with your products and can’t wait to print even more of your amazing designs.
Tim COMMUNITY
I have found your designs wonderful, and im looking forward to introducing them into a store once I get up and running
Aaron PATREON MEMBER
Really impressed with these designs from Sektor7! I have been printing their clean, simple prints with zero issues. No supports needed on any of them, which made the whole process painless. I loved that the files gave the option to print in separate colors or all-in-one using my AMS , nice flexibility depending on how you want to finish them. Detail held up well straight off the printer and everything fit together exactly as intended. Will definitely be printing more as the variety and quantity of designs available is impressive.
Rachel PATREON MEMBER
Share this review
Instagram story: download the image, then add it to your story in Instagram. On your phone, the share button opens Instagram directly.
5.0 out of 53 reviews
Explore all community reviewsEvery model we have ever posted, arranged into our logo.
See the mosaicModern Design, 3D-Printing & STL-Files
Welcome! Pick a nickname – it is the name under your comments.
Saved.
Sign in to comment, rate models and keep your favourites across devices. Your password never touches this site.
Waiting for Thangs – click Allow in the window that just opened.
Sign-in is not open yet. It is coming soon.
Loading your comments…
No comments yet – say hello under any model.
Find all Sektor 7 designs on your favourite platform.
Nothing here yet.
Nothing here yet.
Thangs needs your email address to find your account.
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
