Models that earn their filament. Everything here does a job — holds, dispenses, organises or supports — rather than only being looked at.
68 posts
A dripping wax skull built for an LED tealight, dark from every side and ready to glow on your desk or shelf once Halloween rolls around.
Read moreA butternut-shaped pumpkin with a perforated Voronoi surface that glows from within. Print it in parts, drop in an LED tealight, and set it out for fall.
Read moreA skull hides inside this Voronoi-cut pumpkin, and once a tealight goes in through the screw cap, the whole shape glows from within.
Read moreA tealight holder shaped like softly draped fabric, floating around the flame. Three heights, two fit styles, and a warm glow that looks its best once the room goes dark.
Read moreA hooded guardian rises from twisted roots and rocky detail, standing watch over your pens and tools while doubling as a sculpture worth keeping on display.
Read moreA small arch-shaped shelf you print, assemble and style your own way, with doors, decor panels and inlets to mix and match for whatever you want to show off.
Read moreA dragon head pen holder and a clawed catch-all tray, both carved with scales and horns, ready to turn a plain desk into a small dragon lair.
Read moreA three-piece dining organizer with a ribbed, minimal look, made to sit permanently on the table and keep napkins and cutlery in order.
Read moreThe KASMO E27 Pendant Lamp brings the same curved, perforated shade you know from the E14 version into a size built for the widely used E27 socket and bulb.
Read moreCloudy looks like a stitched cushion but it's fully 3D printed, a soap dispenser with deep seams and a soft padded surface for the bathroom or kitchen sink.
Read moreCUSHORA pairs a cactus silhouette with a padded cushion base, giving you a jewelry organizer that looks soft but prints solid and holds up on any dresser.
Read moreA small knitted-beanie ghost that holds your pen and grins at your monitor all day. Print it in one go with an AMS or build it from separate parts and glue it together yourself.
Read moreA layered, mountain-shaped headphone stand with a built-in tray for earbuds, keys and cables. Four printed parts, three dowel pins, and a finish worth showing off on your desk.
Read moreOMNI pairs a glowing perforated shade with a storage tray built right into the base. Print it in your choice of two bases and give your desk a warm little upgrade.
Read more1 person likes this design
JIMBO pairs a ribbed planter with a warm wooden-look stand, built from two interlocking parts for a stable base that fits any windowsill or shelf.
Read moreA modular mini shelf you print and assemble yourself, with doors, bubble decor, and inserts to arrange collectibles, plants, and jewelry exactly the way you want.
Read moreA rounded desk clock with a built-in pen holder, printed in clean Japandi lines and finished with a real clock mechanism. Free files, simple assembly, and a look that suits any desk.
Read moreThe KASMO pendant lamp turns a printed shade into a warm light feature for your dining table or reading corner, with a spiral cut that lets light spill through in patterns.
Read moreTwo trays, one handle, one clean shape. The OSAM tiered stand organizer moves from kitchen counter to dining table and holds its own in either spot.
Read moreA wine bottle holder that plays a quiet trick on the eye, angled just enough to make the bottle look like it's floating on your counter or shelf.
Read moreA calm, ribbed water feature you print in two sizes and pair with a solar floating fountain. Free STL files, a foam cutting template, and a clean Japandi look for your balcony or garden table.
Read moreA dragon that guards your books instead of just sitting on a shelf. This detailed sculpture works as a real book stand, alone or printed as a pair.
Read moreA glowing gateway between two worlds, sized for a desk or shelf. Print the twisted core, snap in a lamp kit, and watch it come alive in warm white or shifting color.
Read moreA clean cylindrical paper towel holder with a textured side detail, made to sit out in the open on your counter. Comes in two versions and prints ready for daily kitchen use.
Read moreA clean dartboard-style stand that holds three darts and carries whatever name you type into the slicer. Free to download, quick to print, and ready for a game room shelf.
Read moreA textured, curved kitchen roll dispenser that holds its roll steady and grabs a sheet without fuss. Print it in black, red, or white and see how it sits on your counter.
Read moreA modern tripod lamp with a woven-look shade you print in three parts and light up yourself. It brings warm, ambient glow to any desk or shelf without much fuss.
Read moreA dragon head with its jaws open, ready to hold your keys by the door. Printed as one solid piece, this wall mount brings a bit of dark fantasy to any entryway or workshop.
Read moreA ribbed tealight holder that throws soft shadows lit or unlit, prints in two parts, and screws together over hidden storage for the candle itself.
Read moreA paw-shaped wall hook for leashes, collars and keys, with a printed screw and a pad you can personalize with your dog's name before it goes up by the door.
Read moreA dark, sculptural ram skull planter with curved horns and ornamental detail, made to hold succulents or cacti and sit as a statement piece on any shelf or desk.
Read moreTwo electric grinders, one clean stand. This spice grinder organizer keeps salt and pepper mills upright, steady, and off a cluttered countertop for good.
Read moreA compact desk organizer tray 3D print with a textured outer shell and a removable ribbed inlet, made from just six parts you print, press-fit, and screw together.
Read moreBasim is a modular countertop organizer with a hidden drip tray, ribbed sides, and two inlet options, ready to print for the bathroom, kitchen, or desk.
Read moreA cracked eggshell cup standing on little dinosaur feet, made to hold your morning egg and make people smile while they eat it.
Read moreA clip-lid storage container that clicks shut in one motion, printable in 28 sizes with optional labels and rubber studs for grip.
Read moreA hinged box that comes off the plate ready to use, no glue, no screws. Fits Gridfinity inlays and works just as well as a standalone container for your desk or workshop.
Read moreHITAMO is a ribbed toilet paper organizer that hides a standard roll behind a clean lid, prints without supports, and clicks together in minutes.
Read moreA dual-roll toilet paper storage box with a click-in lid and two cover styles, made to sit quietly in a modern bathroom and hold everything out of sight.
Read moreTwo carved dragon heads face off on your desk, one holding your pens, the other your keys and coins, both cast from the same fantasy sculpt.
Read moreA dragon bust that doubles as a pen holder, with sharp scales and a forged metallic finish that turns a plain desk into a small fantasy scene.
Read moreA rose that plugs together without glue or AMS, with a version that hides a small compartment inside the pot for a ring or a quiet note.
Read moreA modular container that sorts pens, tools, or kitchen gear into four compartments, with a textured shell and a stable base built to sit still on any smooth surface.
Read moreA square-edged organizer you print once and rearrange forever, swapping inlets to fit office supplies, workshop tools, or kitchen odds and ends without reprinting the shell.
Read moreOne outer shell, four interchangeable inlets, endless configurations. This modular organizer swaps compartments without reprinting the shell, and its ribbed surface hides layer lines on purpose.
Read moreSince joining Sektor 7 Studios, I’ve been having an absolute blast creating your models! Every file has been top‑tier quality, super fun to work with, and consistently inspiring. I’m genuinely thrilled with your products and can’t wait to print even more of your amazing designs.
Tim COMMUNITY
I have found your designs wonderful, and im looking forward to introducing them into a store once I get up and running
Aaron PATREON MEMBER
Really impressed with these designs from Sektor7! I have been printing their clean, simple prints with zero issues. No supports needed on any of them, which made the whole process painless. I loved that the files gave the option to print in separate colors or all-in-one using my AMS , nice flexibility depending on how you want to finish them. Detail held up well straight off the printer and everything fit together exactly as intended. Will definitely be printing more as the variety and quantity of designs available is impressive.
Rachel PATREON MEMBER
Share this review
Instagram story: download the image, then add it to your story in Instagram. On your phone, the share button opens Instagram directly.
5.0 out of 53 reviews
Explore all community reviewsEvery model we have ever posted, arranged into our logo.
See the mosaicModern Design, 3D-Printing & STL-Files
Welcome! Pick a nickname – it is the name under your comments.
Saved.
Sign in to comment, rate models and keep your favourites across devices. Your password never touches this site.
Waiting for Thangs – click Allow in the window that just opened.
Sign-in is not open yet. It is coming soon.
Loading your comments…
No comments yet – say hello under any model.
Find all Sektor 7 designs on your favourite platform.
Nothing here yet.
Nothing here yet.
Thangs needs your email address to find your account.
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
