A closer look at our latest designs, printing experiments, releases and everything happening inside Sektor 7 Studios.
169 posts
3 people like this design
A twisted rope texture turns the classic pumpkin shape into something that looks hand-knotted, print it whole or in two colors, and set it out for fall.
Read moreWe're marking the season with an autumn giveaway open to our whole community, offering a Creality SPARKX i7 Combo printer and a six month Thangs membership worth $390.
Read moreWe built a new directory where Commercial License Members can list their shops and get found by customers in their own country. Here's how it works and how to join.
Read moreA dripping wax skull built for an LED tealight, dark from every side and ready to glow on your desk or shelf once Halloween rolls around.
Read moreA screaming ghost sinking into the floor, lit from within by a warm LED flicker. This melting ghost tealight holder is a two-piece print built for easy Halloween display.
Read moreA tiny snail carrying a ghost on its shell, made for Halloween shelves. Print it single-color or in two, no AMS or multicolor setup needed.
Read moreA bandaged little mummy with a jack-o-lantern face, split into easy parts so any printer can give it color without a multicolor system.
Read moreOur Halloween season is winding down with a bang: four models land tomorrow, two more follow Sunday, and then it's straight into Christmas releases.
Read moreWe opened a new Ideas Board where anyone can drop a model request, wish or suggestion. Log in or stay anonymous, your idea gets seen either way.
Read moreA taller, quirkier cousin of the original Pumpkin Buddy, this butternut-shaped character prints with no supports and comes in two fun versions to choose from.
Read moreA cheerful little pumpkin character for Halloween, free to download in two versions, one with arms, one with posable print-in-place legs you can sit anywhere.
Read moreOpen this pear and find a pile of skulls inside. A two-size Halloween figure with a multicolor or single-color build and a separate stem you glue on last.
Read moreA desk box shaped like a sardine tin, sliding lid and all, built to keep paper clips, pins and small tools in one playful spot instead of scattered across your desk.
Read moreA two-piece crystal dragon set, scales and spikes and all, ready to print together or apart for a shelf, a desk, or someone's birthday table.
Read moreA garlic bulb that looks ordinary until you notice what's packed inside it. This skull garlic 3D print is a free Halloween file with a genuinely creepy twist.
Read moreA butternut-shaped pumpkin with a perforated Voronoi surface that glows from within. Print it in parts, drop in an LED tealight, and set it out for fall.
Read moreWe just came back from Printed Europe, and we want to say thank you to everyone who stopped by our stand, asked questions and sent us messages afterward.
Read moreA skull-faced pumpkin wrapped in sharp Voronoi flames, built to hold an LED tealight and throw light through every opening once it's lit.
Read moreA skull wrapped in flowing pumpkin ribs, built to hold a tealight and throw warm light through every gap once the room goes dark.
Read moreA skull hides inside this Voronoi-cut pumpkin, and once a tealight goes in through the screw cap, the whole shape glows from within.
Read more1 person likes this design
A twisted chili pepper hiding tiny skulls inside, made to print in parts and glue together. A strange, sinister centerpiece for any Halloween shelf.
Read moreA curved silhouette wrapped in twisted rope texture, this free pumpkin joins four earlier versions to round out a full autumn display without needing an AMS setup.
Read moreA wider, flatter pumpkin with the same twisted-rope texture as the earlier versions, free to print in one color or split into a two-color stem-and-body set.
Read moreA skeleton hidden beneath a heavy, worn robe, ribs and skull exposed beneath flowing fabric folds. A quietly unsettling piece for a Halloween shelf, desk, or horror collection.
Read moreThis carved pumpkin lights up from within, glowing warm orange through its eyes, nose and mouth once you drop in an LED tealight and switch off the room lights.
Read moreA padded, quilted-look paper towel holder that fits standard rolls and turns an everyday kitchen object into something worth printing more than once.
Read moreA small snail hauling a big pumpkin on its shell, ready to print as one piece or in parts you glue together for a full-color fall display.
Read more1 person likes this design
A fierce dragon carved from wood-textured detail, wings spread and claws bared. This wood dragon sculpture STL brings a fantasy centerpiece to any desk, shelf or collection.
Read moreA twisted rope texture over a classic butternut shape, free to download, easy to print in one piece or with a separate stem for a two-color look.
Read moreA pineapple that looks ordinary from behind and hides a cluster of skulls up front. Two sizes, a separate crown, and plenty of room to play with color.
Read moreA pumpkin that melts down onto the surface instead of sitting round and tidy. Two easy parts, no multicolor printer needed, glue and go for shelves or Halloween tables.
Read moreA tealight holder shaped like softly draped fabric, floating around the flame. Three heights, two fit styles, and a warm glow that looks its best once the room goes dark.
Read moreA cozy rope-textured pumpkin you can print in one color or two, no AMS required, and it costs nothing to download and try on your own printer.
Read moreA tiny bandaged elephant with big black eyes joins the Buddy lineup, built to print in one color with the eyes added afterward.
Read more2 people like this design
A skull wrapped in flowing flames, sculpted to look different from every angle. This flaming skull sculpture 3D print brings a dark, dramatic centerpiece to any desk or shelf.
Read moreA hooded guardian rises from twisted roots and rocky detail, standing watch over your pens and tools while doubling as a sculpture worth keeping on display.
Read more1 person likes this design
Meet an angry little ghost who holds your LED tealight while looking thoroughly unhappy about it. Flowing fabric folds, creepy separate eyes, and a warm glow that changes his whole mood once lit.
Read moreA small arch-shaped shelf you print, assemble and style your own way, with doors, decor panels and inlets to mix and match for whatever you want to show off.
Read moreA skull-faced bowl with curved horns and cracked, bone-like texture, made to hold your keys and look good doing it. Part decor, part desk tool.
Read moreA vase carved digitally to look like real wood grain and roots, scaled to fit your space or your printer, and free to download for anyone who wants a warm, organic piece on their shelf.
Read moreA dragon head pen holder and a clawed catch-all tray, both carved with scales and horns, ready to turn a plain desk into a small dragon lair.
Read moreA three-piece dining organizer with a ribbed, minimal look, made to sit permanently on the table and keep napkins and cutlery in order.
Read moreThe KASMO E27 Pendant Lamp brings the same curved, perforated shade you know from the E14 version into a size built for the widely used E27 socket and bulb.
Read moreA ghost that gave up haunting for holding candy. This sculptural bowl watches over your treats with a flowing, fabric-like shape that wraps the whole piece.
Read moreA small ghost hiding under a quilted blanket, printed in two parts and glued together, no AMS or multicolor setup required for a cheerful Halloween shelf piece.
Read moreA grumpy little ghost caught mid-prayer, floating above its own base. Print the parts separately, glue them together, and it's ready for your Halloween shelf.
Read moreTwo spirits with attitude, angry eyes and an unmistakable hand gesture, made to glow from an LED tealight. Print them in black, white, or build a whole rude ghost army for your shelf.
Read moreA pumpkin blasted open from the inside, glowing from an LED tealight tucked behind a screw-cap lid. Jack-O-Blast trades the classic grin for something a lot more dramatic.
Read moreCloudy looks like a stitched cushion but it's fully 3D printed, a soap dispenser with deep seams and a soft padded surface for the bathroom or kitchen sink.
Read moreA screaming pumpkin tealight holder with a stretched, howling face that lights up from inside. Once you drop in an LED tealight, the eyes and mouth glow through the dark like something out of a horror movie.
Read moreCUSHORA pairs a cactus silhouette with a padded cushion base, giving you a jewelry organizer that looks soft but prints solid and holds up on any dresser.
Read moreA skull wrapped in bandages, hollowed out into a bowl for candy and treats. This one earns a spot on the table well before the trick-or-treaters arrive.
Read moreA small knitted-beanie ghost that holds your pen and grins at your monitor all day. Print it in one go with an AMS or build it from separate parts and glue it together yourself.
Read moreA cushion-style teddy bear with a knitted texture that looks stitched by hand but prints as a single body plus two small glued-on parts.
Read moreOne pumpkin, two dark faces staring back at you. Turn it around and the skull gives way to a dragon-like creature, no AMS or multicolor printer needed to pull off the contrast.
Read moreA cheeky little ghost flipping double birds, wearing a knitted beanie with a pom-pom. Free to download, easy to print, and guaranteed to get a reaction from whoever spots it on your desk.
Read moreA layered, mountain-shaped headphone stand with a built-in tray for earbuds, keys and cables. Four printed parts, three dowel pins, and a finish worth showing off on your desk.
Read moreA crouched black dragon with folded wings and an armored tail, ready to guard a shelf or desk. See what makes this sculpture worth the print time.
Read moreA fallen dragon's skull, horns and weathered bone in one striking bust. Two parts click together, ready for bone white, stone gray, or your own paint job.
Read moreOMNI pairs a glowing perforated shade with a storage tray built right into the base. Print it in your choice of two bases and give your desk a warm little upgrade.
Read more1 person likes this design
JIMBO pairs a ribbed planter with a warm wooden-look stand, built from two interlocking parts for a stable base that fits any windowsill or shelf.
Read moreA pen holder that trades plain cylinders for texture, with four surface patterns and two base options so you can pick the fit and the finish that suits your desk.
Read moreA modular mini shelf you print and assemble yourself, with doors, bubble decor, and inserts to arrange collectibles, plants, and jewelry exactly the way you want.
Read moreA rounded desk clock with a built-in pen holder, printed in clean Japandi lines and finished with a real clock mechanism. Free files, simple assembly, and a look that suits any desk.
Read moreThe KASMO pendant lamp turns a printed shade into a warm light feature for your dining table or reading corner, with a spiral cut that lets light spill through in patterns.
Read moreTwo trays, one handle, one clean shape. The OSAM tiered stand organizer moves from kitchen counter to dining table and holds its own in either spot.
Read moreA wine bottle holder that plays a quiet trick on the eye, angled just enough to make the bottle look like it's floating on your counter or shelf.
Read moreA calm, ribbed water feature you print in two sizes and pair with a solar floating fountain. Free STL files, a foam cutting template, and a clean Japandi look for your balcony or garden table.
Read moreA dragon that guards your books instead of just sitting on a shelf. This detailed sculpture works as a real book stand, alone or printed as a pair.
Read moreA glowing gateway between two worlds, sized for a desk or shelf. Print the twisted core, snap in a lamp kit, and watch it come alive in warm white or shifting color.
Read moreA clean cylindrical paper towel holder with a textured side detail, made to sit out in the open on your counter. Comes in two versions and prints ready for daily kitchen use.
Read moreA clean dartboard-style stand that holds three darts and carries whatever name you type into the slicer. Free to download, quick to print, and ready for a game room shelf.
Read moreSince joining Sektor 7 Studios, I’ve been having an absolute blast creating your models! Every file has been top‑tier quality, super fun to work with, and consistently inspiring. I’m genuinely thrilled with your products and can’t wait to print even more of your amazing designs.
Tim COMMUNITY
I have found your designs wonderful, and im looking forward to introducing them into a store once I get up and running
Aaron PATREON MEMBER
Really impressed with these designs from Sektor7! I have been printing their clean, simple prints with zero issues. No supports needed on any of them, which made the whole process painless. I loved that the files gave the option to print in separate colors or all-in-one using my AMS , nice flexibility depending on how you want to finish them. Detail held up well straight off the printer and everything fit together exactly as intended. Will definitely be printing more as the variety and quantity of designs available is impressive.
Rachel PATREON MEMBER
Share this review
Instagram story: download the image, then add it to your story in Instagram. On your phone, the share button opens Instagram directly.
5.0 out of 53 reviews
Explore all community reviewsEvery model we have ever posted, arranged into our logo.
See the mosaicModern Design, 3D-Printing & STL-Files
Welcome! Pick a nickname – it is the name under your comments.
Saved.
Sign in to comment, rate models and keep your favourites across devices. Your password never touches this site.
Waiting for Thangs – click Allow in the window that just opened.
Sign-in is not open yet. It is coming soon.
Loading your comments…
No comments yet – say hello under any model.
Find all Sektor 7 designs on your favourite platform.
Nothing here yet.
Nothing here yet.
Thangs needs your email address to find your account.
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
