Display models made to reward a close look: dragons, busts and figures with the detail concentrated where the eye lands first.
82 posts
A dripping wax skull built for an LED tealight, dark from every side and ready to glow on your desk or shelf once Halloween rolls around.
Read moreA tiny snail carrying a ghost on its shell, made for Halloween shelves. Print it single-color or in two, no AMS or multicolor setup needed.
Read moreA bandaged little mummy with a jack-o-lantern face, split into easy parts so any printer can give it color without a multicolor system.
Read moreA cheerful little pumpkin character for Halloween, free to download in two versions, one with arms, one with posable print-in-place legs you can sit anywhere.
Read moreOpen this pear and find a pile of skulls inside. A two-size Halloween figure with a multicolor or single-color build and a separate stem you glue on last.
Read moreA two-piece crystal dragon set, scales and spikes and all, ready to print together or apart for a shelf, a desk, or someone's birthday table.
Read moreA garlic bulb that looks ordinary until you notice what's packed inside it. This skull garlic 3D print is a free Halloween file with a genuinely creepy twist.
Read moreA skull-faced pumpkin wrapped in sharp Voronoi flames, built to hold an LED tealight and throw light through every opening once it's lit.
Read moreA skull wrapped in flowing pumpkin ribs, built to hold a tealight and throw warm light through every gap once the room goes dark.
Read moreA skull hides inside this Voronoi-cut pumpkin, and once a tealight goes in through the screw cap, the whole shape glows from within.
Read more1 person likes this design
A twisted chili pepper hiding tiny skulls inside, made to print in parts and glue together. A strange, sinister centerpiece for any Halloween shelf.
Read moreA curved silhouette wrapped in twisted rope texture, this free pumpkin joins four earlier versions to round out a full autumn display without needing an AMS setup.
Read moreA wider, flatter pumpkin with the same twisted-rope texture as the earlier versions, free to print in one color or split into a two-color stem-and-body set.
Read moreA skeleton hidden beneath a heavy, worn robe, ribs and skull exposed beneath flowing fabric folds. A quietly unsettling piece for a Halloween shelf, desk, or horror collection.
Read moreThis carved pumpkin lights up from within, glowing warm orange through its eyes, nose and mouth once you drop in an LED tealight and switch off the room lights.
Read moreA small snail hauling a big pumpkin on its shell, ready to print as one piece or in parts you glue together for a full-color fall display.
Read more1 person likes this design
A fierce dragon carved from wood-textured detail, wings spread and claws bared. This wood dragon sculpture STL brings a fantasy centerpiece to any desk, shelf or collection.
Read moreA twisted rope texture over a classic butternut shape, free to download, easy to print in one piece or with a separate stem for a two-color look.
Read moreA pineapple that looks ordinary from behind and hides a cluster of skulls up front. Two sizes, a separate crown, and plenty of room to play with color.
Read moreA pumpkin that melts down onto the surface instead of sitting round and tidy. Two easy parts, no multicolor printer needed, glue and go for shelves or Halloween tables.
Read moreA cozy rope-textured pumpkin you can print in one color or two, no AMS required, and it costs nothing to download and try on your own printer.
Read more2 people like this design
A skull wrapped in flowing flames, sculpted to look different from every angle. This flaming skull sculpture 3D print brings a dark, dramatic centerpiece to any desk or shelf.
Read moreA hooded guardian rises from twisted roots and rocky detail, standing watch over your pens and tools while doubling as a sculpture worth keeping on display.
Read more1 person likes this design
Meet an angry little ghost who holds your LED tealight while looking thoroughly unhappy about it. Flowing fabric folds, creepy separate eyes, and a warm glow that changes his whole mood once lit.
Read moreA skull-faced bowl with curved horns and cracked, bone-like texture, made to hold your keys and look good doing it. Part decor, part desk tool.
Read moreA ghost that gave up haunting for holding candy. This sculptural bowl watches over your treats with a flowing, fabric-like shape that wraps the whole piece.
Read moreA small ghost hiding under a quilted blanket, printed in two parts and glued together, no AMS or multicolor setup required for a cheerful Halloween shelf piece.
Read moreA grumpy little ghost caught mid-prayer, floating above its own base. Print the parts separately, glue them together, and it's ready for your Halloween shelf.
Read moreTwo spirits with attitude, angry eyes and an unmistakable hand gesture, made to glow from an LED tealight. Print them in black, white, or build a whole rude ghost army for your shelf.
Read moreA pumpkin blasted open from the inside, glowing from an LED tealight tucked behind a screw-cap lid. Jack-O-Blast trades the classic grin for something a lot more dramatic.
Read moreA screaming pumpkin tealight holder with a stretched, howling face that lights up from inside. Once you drop in an LED tealight, the eyes and mouth glow through the dark like something out of a horror movie.
Read moreA small knitted-beanie ghost that holds your pen and grins at your monitor all day. Print it in one go with an AMS or build it from separate parts and glue it together yourself.
Read moreA cushion-style teddy bear with a knitted texture that looks stitched by hand but prints as a single body plus two small glued-on parts.
Read moreA cheeky little ghost flipping double birds, wearing a knitted beanie with a pom-pom. Free to download, easy to print, and guaranteed to get a reaction from whoever spots it on your desk.
Read moreA crouched black dragon with folded wings and an armored tail, ready to guard a shelf or desk. See what makes this sculpture worth the print time.
Read moreA fallen dragon's skull, horns and weathered bone in one striking bust. Two parts click together, ready for bone white, stone gray, or your own paint job.
Read moreA dragon that guards your books instead of just sitting on a shelf. This detailed sculpture works as a real book stand, alone or printed as a pair.
Read moreA sitting giraffe rebuilt as an open Voronoi lattice, casting shadow and light through its own body. A quiet, modern statement piece for a shelf, desk or sideboard.
Read moreA dragon head with its jaws open, ready to hold your keys by the door. Printed as one solid piece, this wall mount brings a bit of dark fantasy to any entryway or workshop.
Read moreA frog shape reimagined as an open Voronoi shell, light from every angle and striking in matte black. Here is what to know before you print one.
Read moreThomas the bulldog sits on his own brick wall base, hoodie on and coffee in hand, ready to bring some attitude to a desk that badly needs it.
Read moreA dark, scaled dragon with massive wings and a fierce pose, made for collectors who want a display piece with real presence on the shelf or desk.
Read moreA squirrel silhouette opened up into a Voronoi lattice, this sculpture turns a familiar shape into something you'll want to display, not just look at.
Read moreMeet Tim and Tom, a grumpy cat and an unimpressed dog who share one unmistakable look. A small matching set built for anyone who wants some attitude on their desk.
Read moreA bulldog rebuilt from open Voronoi cells, printable in resin or FDM, ready to scale up for a striking shelf or desk display.
Read moreA dragon built to look mean on a shelf — spiked armor, wide wings, and a pose that leans forward like it's about to move. Here's what makes it worth the filament.
Read moreA dark, sculptural ram skull planter with curved horns and ornamental detail, made to hold succulents or cacti and sit as a statement piece on any shelf or desk.
Read moreMeet Varnok, a skull book stand that looks like it crawled out of a forgotten crypt to hold your paperback. Bone-like ribs, a hollow stare, and a base sturdy enough for real reading.
Read moreA small frog figurine with eyes that actually rotate, so it can look curious, goofy or completely lost depending on your mood. Press-fit assembly, no AMS required, and a fun desk companion once it's glued together.
Read moreWings raised, jaws open, body low to the ground — this aggressive dragon captures the moment before the strike, ready to become the centerpiece of any dragon collection.
Read moreA ribbed, softly sculpted bunny with movable legs, offered in two sizes and two versions, ready to sit on a shelf or spring table this Easter.
Read moreA pint-sized dragon with big eyes and bat wings, made to sit on your desk or shelf and bring a bit of fantasy into an ordinary corner of your home.
Read moreA demon skull catchall with curling horns, ready to guard your keys, earbuds and loose coins. Here's what the skull catchall bowl 3D print looks like on your desk and how it prints.
Read moreAn otter reimagined through open Voronoi geometry, light enough for a desk and striking enough for a shelf, ready to print as an STL file.
Read moreA geometric owl silhouette built from an organic Voronoi lattice, made to catch light and shadow on a shelf, a desk, or anywhere modern decor needs one strong shape.
Read moreA small turtle-shaped lamp with a Voronoi shell that scatters warm light across the room, easy enough to print as a first supported model.
Read moreA proud dragon with wide-spread wings and finely detailed scales, ready to print as a shelf or desk centerpiece. Comes in two sizes you can display alone or together.
Read moreA cheerful little pumpkin figure with two poses to choose from, free to print this Halloween and easy to assemble from just four parts.
Read moreA cracked pumpkin with a ribcage and spine hiding inside, made to hold a tealight. Print it plain, paint it, or build it multipart — this one earns its spot on any Halloween shelf.
Read moreA woven pumpkin shell that looks too delicate to print, yet holds its shape and a tealight candle just fine, casting shadow patterns across the table on autumn nights.
Read moreAn abstract flame-style pumpkin lantern that holds a tealight and turns any shelf into a small autumn scene. Print it in orange, in black, or both and see which one you like better lit.
Read moreA pumpkin with a dark secret: crack it open in your imagination and a cluster of skulls stares back. One color or hand painted, it holds its shape either way.
Read moreA skull opens from black rose petals on a stone base, split into three parts you plug together after printing. A quiet, gothic centerpiece for the Halloween shelf.
Read moreA skull emerging from black petals on a stone base, this gothic rose prints in three parts that simply plug together for an eerie Halloween centerpiece.
Read moreA skull grown through with rose petals, updated for cleaner geometry and a sharper finish. Print it as a gothic centerpiece or a quiet Halloween statement.
Read moreA ghost that drips instead of haunts, lit from within by a tealight. Sweet, spooky, and easy to fit into any cozy autumn corner of your home.
Read moreA goofy-creepy skull with a lolling tongue, built from three easy parts. Print it in white, red, and black PLA and it is ready for your Halloween shelf.
Read moreA dripping, angry-faced jack-o'-lantern built to hold a tealight and drip mood lighting across your Halloween table setup all season long.
Read moreA jack-o'-lantern that's given up on being cute. This angry pumpkin 3D print snarls its way onto your desk or shelf, printed in three easy parts.
Read moreA pumpkin built entirely from skulls, this one-piece print swaps the usual carved face for a chilling all-over texture that owns any Halloween table.
Read moreA pumpkin covered in faceted diamonds instead of ridges, built to sit on a shelf or table and catch the light from every angle it can find.
Read moreEvery inch of this pumpkin is wrapped in carved leaves instead of ridges, giving your autumn table a piece that looks handmade, not store-bought.
Read moreA dark mushroom fused with a grim skull, made to hold a tealight and glow. This piece brings eerie autumn atmosphere to any shelf or table, no paint required.
Read moreA glossy red apple that hides something else entirely: a cluster of carved skulls waiting beneath the skin. Easy to print and ready for your Halloween shelf.
Read moreSebbi is a two-piece ghost figurine 3D print that peeks over a brick wall, ready to bring a cozy, slightly eerie Halloween mood to any shelf or desk.
Read moreA pumpkin shaped like coiled rope, part fall décor, part nautical charm, easy to print and ready to sit as the centerpiece of your Halloween or Thanksgiving table.
Read moreMeet Katie, a small ghost built to hold an LED tealight and glow through her spooky eyes. A simple, cheerful print for windowsills, shelves, and Halloween tables.
Read moreA cheerful little pumpkin figure with a stem and eyes that snap together in minutes, sized small or bigger, ready to sit on a shelf or table this Halloween.
Read moreA pumpkin and a skull fused into one tealight holder, its Voronoi shell throwing sharp shadows across the room the moment you light it up.
Read moreA skull with a crown of flames, hollowed out so a tealight can flicker through the details. Made for Halloween shelves, but it earns its keep the whole year.
Read moreA jack-o'-lantern with Venom's teeth and tongue, printed in one piece and ready to glare from your Halloween table or shelf all season long.
Read moreA witchy little ghost in a detective hat, ready to haunt your desk or shelf. Print it in one color or two parts for a multicolor look.
Read moreThat's every model filed under this topic — across every collection. More are coming.
Since joining Sektor 7 Studios, I’ve been having an absolute blast creating your models! Every file has been top‑tier quality, super fun to work with, and consistently inspiring. I’m genuinely thrilled with your products and can’t wait to print even more of your amazing designs.
Tim COMMUNITY
I have found your designs wonderful, and im looking forward to introducing them into a store once I get up and running
Aaron PATREON MEMBER
Really impressed with these designs from Sektor7! I have been printing their clean, simple prints with zero issues. No supports needed on any of them, which made the whole process painless. I loved that the files gave the option to print in separate colors or all-in-one using my AMS , nice flexibility depending on how you want to finish them. Detail held up well straight off the printer and everything fit together exactly as intended. Will definitely be printing more as the variety and quantity of designs available is impressive.
Rachel PATREON MEMBER
Share this review
Instagram story: download the image, then add it to your story in Instagram. On your phone, the share button opens Instagram directly.
5.0 out of 53 reviews
Explore all community reviewsEvery model we have ever posted, arranged into our logo.
See the mosaicModern Design, 3D-Printing & STL-Files
Welcome! Pick a nickname – it is the name under your comments.
Saved.
Sign in to comment, rate models and keep your favourites across devices. Your password never touches this site.
Waiting for Thangs – click Allow in the window that just opened.
Sign-in is not open yet. It is coming soon.
Loading your comments…
No comments yet – say hello under any model.
Find all Sektor 7 designs on your favourite platform.
Nothing here yet.
Nothing here yet.
Thangs needs your email address to find your account.
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
