Display models made to reward a close look: dragons, busts and figures with the detail concentrated where the eye lands first.
82 posts
A dripping wax skull built for an LED tealight, dark from every side and ready to glow on your desk or shelf once Halloween rolls around.
Read moreA tiny snail carrying a ghost on its shell, made for Halloween shelves. Print it single-color or in two, no AMS or multicolor setup needed.
Read moreA bandaged little mummy with a jack-o-lantern face, split into easy parts so any printer can give it color without a multicolor system.
Read moreA cheerful little pumpkin character for Halloween, free to download in two versions, one with arms, one with posable print-in-place legs you can sit anywhere.
Read moreOpen this pear and find a pile of skulls inside. A two-size Halloween figure with a multicolor or single-color build and a separate stem you glue on last.
Read moreA two-piece crystal dragon set, scales and spikes and all, ready to print together or apart for a shelf, a desk, or someone's birthday table.
Read moreA garlic bulb that looks ordinary until you notice what's packed inside it. This skull garlic 3D print is a free Halloween file with a genuinely creepy twist.
Read moreA skull-faced pumpkin wrapped in sharp Voronoi flames, built to hold an LED tealight and throw light through every opening once it's lit.
Read moreA skull wrapped in flowing pumpkin ribs, built to hold a tealight and throw warm light through every gap once the room goes dark.
Read moreA skull hides inside this Voronoi-cut pumpkin, and once a tealight goes in through the screw cap, the whole shape glows from within.
Read more1 person likes this design
A twisted chili pepper hiding tiny skulls inside, made to print in parts and glue together. A strange, sinister centerpiece for any Halloween shelf.
Read moreA curved silhouette wrapped in twisted rope texture, this free pumpkin joins four earlier versions to round out a full autumn display without needing an AMS setup.
Read moreA wider, flatter pumpkin with the same twisted-rope texture as the earlier versions, free to print in one color or split into a two-color stem-and-body set.
Read moreA skeleton hidden beneath a heavy, worn robe, ribs and skull exposed beneath flowing fabric folds. A quietly unsettling piece for a Halloween shelf, desk, or horror collection.
Read moreThis carved pumpkin lights up from within, glowing warm orange through its eyes, nose and mouth once you drop in an LED tealight and switch off the room lights.
Read moreA small snail hauling a big pumpkin on its shell, ready to print as one piece or in parts you glue together for a full-color fall display.
Read more1 person likes this design
A fierce dragon carved from wood-textured detail, wings spread and claws bared. This wood dragon sculpture STL brings a fantasy centerpiece to any desk, shelf or collection.
Read moreA twisted rope texture over a classic butternut shape, free to download, easy to print in one piece or with a separate stem for a two-color look.
Read moreA pineapple that looks ordinary from behind and hides a cluster of skulls up front. Two sizes, a separate crown, and plenty of room to play with color.
Read moreA pumpkin that melts down onto the surface instead of sitting round and tidy. Two easy parts, no multicolor printer needed, glue and go for shelves or Halloween tables.
Read moreA cozy rope-textured pumpkin you can print in one color or two, no AMS required, and it costs nothing to download and try on your own printer.
Read more2 people like this design
A skull wrapped in flowing flames, sculpted to look different from every angle. This flaming skull sculpture 3D print brings a dark, dramatic centerpiece to any desk or shelf.
Read moreA hooded guardian rises from twisted roots and rocky detail, standing watch over your pens and tools while doubling as a sculpture worth keeping on display.
Read more1 person likes this design
Meet an angry little ghost who holds your LED tealight while looking thoroughly unhappy about it. Flowing fabric folds, creepy separate eyes, and a warm glow that changes his whole mood once lit.
Read moreA skull-faced bowl with curved horns and cracked, bone-like texture, made to hold your keys and look good doing it. Part decor, part desk tool.
Read moreA ghost that gave up haunting for holding candy. This sculptural bowl watches over your treats with a flowing, fabric-like shape that wraps the whole piece.
Read moreA small ghost hiding under a quilted blanket, printed in two parts and glued together, no AMS or multicolor setup required for a cheerful Halloween shelf piece.
Read moreA grumpy little ghost caught mid-prayer, floating above its own base. Print the parts separately, glue them together, and it's ready for your Halloween shelf.
Read moreTwo spirits with attitude, angry eyes and an unmistakable hand gesture, made to glow from an LED tealight. Print them in black, white, or build a whole rude ghost army for your shelf.
Read moreA pumpkin blasted open from the inside, glowing from an LED tealight tucked behind a screw-cap lid. Jack-O-Blast trades the classic grin for something a lot more dramatic.
Read moreA screaming pumpkin tealight holder with a stretched, howling face that lights up from inside. Once you drop in an LED tealight, the eyes and mouth glow through the dark like something out of a horror movie.
Read moreA small knitted-beanie ghost that holds your pen and grins at your monitor all day. Print it in one go with an AMS or build it from separate parts and glue it together yourself.
Read moreA cushion-style teddy bear with a knitted texture that looks stitched by hand but prints as a single body plus two small glued-on parts.
Read moreA cheeky little ghost flipping double birds, wearing a knitted beanie with a pom-pom. Free to download, easy to print, and guaranteed to get a reaction from whoever spots it on your desk.
Read moreA crouched black dragon with folded wings and an armored tail, ready to guard a shelf or desk. See what makes this sculpture worth the print time.
Read moreA fallen dragon's skull, horns and weathered bone in one striking bust. Two parts click together, ready for bone white, stone gray, or your own paint job.
Read moreSince joining Sektor 7 Studios, I’ve been having an absolute blast creating your models! Every file has been top‑tier quality, super fun to work with, and consistently inspiring. I’m genuinely thrilled with your products and can’t wait to print even more of your amazing designs.
Tim COMMUNITY
I have found your designs wonderful, and im looking forward to introducing them into a store once I get up and running
Aaron PATREON MEMBER
Really impressed with these designs from Sektor7! I have been printing their clean, simple prints with zero issues. No supports needed on any of them, which made the whole process painless. I loved that the files gave the option to print in separate colors or all-in-one using my AMS , nice flexibility depending on how you want to finish them. Detail held up well straight off the printer and everything fit together exactly as intended. Will definitely be printing more as the variety and quantity of designs available is impressive.
Rachel PATREON MEMBER
Share this review
Instagram story: download the image, then add it to your story in Instagram. On your phone, the share button opens Instagram directly.
5.0 out of 53 reviews
Explore all community reviewsEvery model we have ever posted, arranged into our logo.
See the mosaicModern Design, 3D-Printing & STL-Files
Welcome! Pick a nickname – it is the name under your comments.
Saved.
Sign in to comment, rate models and keep your favourites across devices. Your password never touches this site.
Waiting for Thangs – click Allow in the window that just opened.
Sign-in is not open yet. It is coming soon.
Loading your comments…
No comments yet – say hello under any model.
Find all Sektor 7 designs on your favourite platform.
Nothing here yet.
Nothing here yet.
Thangs needs your email address to find your account.
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
Share your prints, ask other makers and get early looks at new models. With your Patreon or Thangs membership you also get your member role on the server.
No role after a few minutes? Write to us in the members area chat.
Join us on Discord
