Hello everyone 🙂

Today we would like to introduce you to our new vase creation, which comes in a very elegant “ribbed” design. The vase is printed in vase mode, as is the inlet. In addition, we have modeled a small pendant to round off the whole design.

Please make sure that all layers have been printed properly. Otherwise there may be a leakage of water. If you have problems with this, then print the INLET without vase mode.

★ STL-FILES & PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)

• STL-FILES YOU WILL FIND HERE

• 3MF-FILES FOR BAMBU LAB PRINTER YOU CAN FIND HERE

★ MOUNTING INSTRUCTIONS:

• SEE PICTURES

★ RECOMMEND PRINT-SETTINGS (Vase):

• Filament: Bambulab PLA Matte black (used in our make)

• Infill: 0% (Vasemode)

• Layer Height: 0.2mm

• Walls: 1

• Nozzle Size: 0.4mm

• Support Structure: None needed, ensuring a hassle-free printing process.

• Brim: None needed, but when you have adhesion problems than activate the brim

• Vasemode Settings  (Settings –> Other –> Spiral vase): Activate

★ RECOMMEND PRINT-SETTINGS (Inlet):

• Filament: Bambulab PLA Matte white (used in our make)

• Infill: 0% (Vasemode)

• Layer Height: 0.2mm

• Walls: 1

• Nozzle Size: 0.4mm

• Support Structure: None needed, ensuring a hassle-free printing process.

• Brim: None needed, but when you have adhesion problems than activate the brim

• Vasemode Settings  (Settings –> Other –> Spiral vase): Activate

★ STL-FILES & PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)

• STL-FILES YOU WILL FIND HERE

• 3MF-FILES FOR BAMBU LAB PRINTER YOU CAN FIND HERE

YOU CAN PURCHASE A COMMERCIAL LICENSE HERE AND ALSO A LICENSE FOR PRIVATE USE WITH WHICH YOU CAN GET MORE PREMIUM MODELS (CLICK ME)

Best regards

Leon from Sektor 7 Studios