We’re excited to introduce our new Setim & Setam Modular Organizer System — a clean, modern, and highly flexible storage solution designed for everyday use across multiple environments.
This organizer was developed with two main goals: modularity and print-aware design.
Short assembly video you can find here: https://www.instagram.com/reel/DUNmkQzDWaY/
🔧 Modular Concept
The system consists of a main container and interchangeable inlets. You can choose between multiple inlet variants depending on your use case — from open layouts to structured divider grids.
All inserts are removable and swappable, so you can reconfigure your organizer anytime without reprinting the outer shell.
🧱 Multiple Inlet Options
Different inlet versions are included to support a wide range of storage needs:
• fine compartment grids
• larger divider layouts
• open variants
• mixed compartment styles
Perfect for tools, office supplies, hobby parts, kitchen items and more.
🎨 Timeless Ribbed Design — Print Artifacts Turned Into Features
The exterior uses a ribbed, timeless surface pattern that is not only visually clean but also highly print-friendly. Instead of fighting typical FDM print characteristics, we intentionally designed around them.
Near the lower section, you’ll notice a distinct visual break in the surface. This is placed exactly where a natural print transition line often appears. Rather than hiding it, we integrated it into the design as a deliberate styling element.
Additionally, the ribbed “skin” structure helps visually mask the Z-seam and other minor layer artifacts. In short:
typical print marks were not treated as flaws — but transformed into design features.
🏠 True Multipurpose Use
Designed to work across many environments:
• Desk organizer
• Workshop storage
• Kitchen organizer
• Craft & hobby sorting
• General home organization
All variants share the same visual language, so different modules look consistent when combined.
Thank you for supporting my work ❤️
As always, feel free to leave feedback or suggest new texts, designs, or variations in the comments ❤️
Enjoy & happy printing!
— Leon / Sektor 7 Studios
RECOMMENDED PRINT SETTINGS
-
Filament: Bambulab PLA Matte green, black
-
Infill: 10% Gyroid or Grid
-
Layer Height: 0.2mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: needed a little bit
-
Brim: None needed, but when you have adhesion problems than activate the brim
-
Skirt loops: 1
REALISTIC SURFACE SETTING (OUTER CONTOUR OF THE CONTINUOUS LINES BELOW)
(We used it in our design, but it’s not a must.) –> .3mf attached
Here’s a proven setup (Bambu Studio):
-
Fuzzy Skin: None (allow paint)
-
Fuzzy skin point distance: 0.50 mm
-
Fuzzy skin thickness: 0.1 mm
★ PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)
STL-FILES YOU WILL FIND HERE IN THE ATTACHEMENT
PREDEFINED 3MF-FILES FOR BAMBU LAB PRINTER YOU CAN FIND IN THE ATTACHEMENT (COMING SOON)
YOU CAN ALSO BUY THIS MODEL FOR PRIVATE USE UNDER THIS POST
Best regards
Leon from Sektor 7 Studios
Please note: The STL files attached to this post may NOT be sold, listed for free, redistributed, posted to other platforms, or given away. For commercial use, an active subscription with us (Sektor 7 Studios) is required.
