Minimal meets texture.
The Half Japandi Bunny features a unique split design: a smooth lower half combined with a clean ribbed upper structure — blending softness and structure in one sculptural piece.
Designed for modern interiors and timeless Easter decor.
✨ Features
• Two sizes
• Two versions: with little legs or without legs
• Elegant half-texture design
• Soft organic silhouette
• Support-free print
• Beautiful light & shadow play
The version with little legs feels slightly more playful, while the version without legs looks extra minimal and architectural.
Perfect for earthy tones, matte neutrals, warm beige, sand colors, or soft pastels.
Let me know what you think — and feel free to share your prints in the comments 🔥
Enjoy & happy printing!
— Leon / Sektor 7 Studios
RECOMMENDED PRINT SETTINGS
-
Filament: Bambulab PLA Matte sand (used in our make)
-
Infill: 8% Gyroid or Grid
-
Layer Height: 0.2mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: needed
-
Brim: None needed
OPTIONAL REALISTIC SURFACE SETTING (UPPER PART WITHOUT RIBS)
(We used it in our design, but it’s not a must.) –> .3mf attached
Here’s a proven setup (Bambu Studio):
-
Fuzzy Skin: Contour and hole
-
Fuzzy skin point distance: 0.50 mm
-
Fuzzy skin thickness: 0.1 mm or 0.2mm
★ PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)
STL-FILES YOU WILL FIND HERE IN THE ATTACHEMENT
PREDEFINED 3MF-FILES FOR BAMBU LAB PRINTER YOU CAN FIND IN THE ATTACHEMENT (COMING SOON)
YOU CAN ALSO BUY THIS MODEL FOR PRIVATE USE UNDER THIS POST
Best regards
Leon from Sektor 7 Studios
Please note: The STL files attached to this post may NOT be sold, listed for free, redistributed, posted to other platforms, or given away. For commercial use, an active subscription with us (Sektor 7 Studios) is required.
