Today’s drop is a super practical print-in-place case with a satisfying click-lock lid. Use it as a pencil case, EDC organizer, small tool box, card/notepad holder — basically whatever you want.

✅ Print in Place – printed in this position
✅ Simple click mechanism keeps the lid securely closed
✅ Modular design with swappable inlets
✅ Clean, minimal look — perfect for desk setups & everyday carry

🔧 Inlets / Inserts

You’ll get 3 different inlets you can swap depending on your use case (pens, small tools, parts, EDC items, etc.).
They’re simply plugged in and slide into the dedicated slot — quick and easy.

🖨️ Quick print tip

• After printing, gently “free” the moving parts by flexing the hinge area a bit

• If the click feels too tight: lightly deburr / let it wear in for a few cycles — then it locks in perfectly

💛 Tell me in the comments: Which inlet should I design next?

★ RECOMMEND PRINT-SETTINGS

• Filament: Bambulab PLA Matte black, white (used in our make)

• Infill: 8% Gyroid or Grid

• Layer Height: 0.2mm

• Walls: 2

• Nozzle Size: 0.4mm

• Support Structure: None needed, ensuring a hassle-free printing process.

• Brim: None needed, but when you have adhesion problems than activate the brim

★ PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)

• STL-FILES YOU WILL FIND HERE IN THE ATTACHEMENT

• PREDEFINED 3MF-FILES FOR BAMBU LAB PRINTER YOU CAN FIND IN THE ATTACHEMENT (COMING SOON)

• YOU CAN ALSO BUY THIS MODEL FOR PRIVATE USE UNDER THIS POST

YOU CAN PURCHASE A COMMERCIAL LICENSE HERE AND ALSO A LICENSE FOR PRIVATE USE WITH WHICH YOU CAN GET MORE PREMIUM MODELS (CLICK ME)

Best regards

Leon from Sektor 7 Studios

Please note: The STL files attached to this post may NOT be sold, listed for free, redistributed, posted to other platforms, or given away. For commercial use, an active subscription with us (Sektor 7 Studios) is required.