★ PREDEFINED PRINT PROFILES
Hello everyone 🙂
As announced, we are continuing to expand our “OFFICE ESSENTIALS” & “HOME & LIVING” collection. This time we would like to introduce you to our DESIGNER PHOTO HOLDER / CARD HOLDER IN A FATHERSDAY DESIGN.
The photo holder comes in a timeless and modern design and can be printed without Fuzzy Skin and with Fuzzy Skin. Setting the fuzzy skin creates a unique look. In the pictures we printed with Fuzzy Skin. Fuzzy Skin Settings see below.
We have modeled a lettering that slides into one of the slots of the photo holder and can be changed as desired.
If you want a version without the lettering, you can use our earlier version: https://www.patreon.com/posts/photo-holder-125665400
★ VARIANTS OF THE LETTERING:
-
“PAPA” PLACED IN THE MIDDLE & ON THE LEFT SIDE
-
“PAPA” WITH HEARTS
-
“DAD” PLACED IN THE MIDDLE & ON THE LEFT SIDE
-
“DAD” WITH HEARTS
★ RECOMMEND PRINT-SETTINGS:
-
Filament: Bambulab PLA Matte black & brown (used in our make)
-
Infill: 15 % Gyroid or Grid
-
Layer Height: 0.2mm or 0,16mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: None needed, ensuring a hassle-free printing process.
-
Brim: None needed, but when you have adhesion problems than activate the brim
-
Fuzzy Skin Settings (Settings –> Other –> Fuzzy Skin): All Walls / Fuzzy skin point distance: 0,5mm / Fuzzy skin thickness: 0,3mm
★ STL-FILES & PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)
Best regards
Leon from Sektor 7 Studios
