Hello everyone 🙂 We want to present you our new Origimi Lamp in a modern & timeless design.
Hello everyone 🙂
As we announces we want to present you our new Lamp. Our Origimi Lamp comes in a modern & timless design. The free-form shape gives the lamp a unique look that doesn’t exist anywhere else. The lighting ambience is just great. Have fun printing 🙂
★ WHAT DO YOU NEED?
You need only a standard E14-Socket. (for example this one: https://amzn.eu/d/cIyh6AD)
★ VARIANTS OF THE LAMPSHADE:
-
LAMPSHADE WITHOUT PATTERN (RECOMMEND)
-
LAMPSHADE WITH PATTERN
★ MOUNTING INSTRUCTIONS:
-
Print out the base, one of the lampshades and the lampshade-holder
-
Be carfeul when you remove the supports from the lampshade-holder
-
Be careful when you remove the lampshade from the print bed
-
Place the lampshade on the lampshade-holder in the right position and click in the lampshade. This step requires some patience and skill.
-
Afte you install the lampshade on the lampshade-holder you can place the assembly on the base. Insert the E14-Socket from below through the base and counter with the nut of the E14 socket.
★ RECOMMEND PRINT-SETTINGS (BASE):
-
Filament: Bambulab PLA Matte brown & grey (used in our make)
-
Infill: 10% Gyroid or Grid
-
Layer Height: 0.2mm or 0,16mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: None needed, ensuring a hassle-free printing process.
-
Brim: None needed, but when you have adhesion problems than activate the brim
-
Fuzzy Skin Settings (Settings –> Other –> Fuzzy Skin:Â All Walls / Fuzzy skin point distance: 0,5mm / Fuzzy skin thickness: 0,3mm
★ RECOMMEND PRINT-SETTINGS (LAMPSHADE HOLDER):
-
Filament: Bambulab PLA Matte brown, white & grey (used in our make)
-
Infill: 10% Gyroid or Grid
-
Layer Height: 0.2mm or 0,16mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: needed!
-
Brim: None needed, but when you have adhesion problems than activate the brim
★ RECOMMEND PRINT-SETTINGS (LAMPSHADE):
-
Filament: Bambulab PLA Matte brown, white & grey (used in our make)
-
Infill: 10% Gyroid or Grid
-
Layer Height: 0.2mm or 0,16mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: None needed, ensuring a hassle-free printing process.
-
Brim: None needed, but when you have adhesion problems than activate the brim
-
Fuzzy Skin Settings (Settings –> Other –> Fuzzy Skin):Â All Walls / Fuzzy skin point distance: 0,3mm / Fuzzy skin thickness: 0,2mm
-
Vasemode Settings  (Settings –> Other –> Spiral vase): Activate
★ STL-FILES & PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)
Best regards
Leon from Sektor 7 Studios
