Hello everyone 🙂

Today we would like to introduce you to our new vase creation, which comes in a very elegant “ribbed” design. The vase is printed in vase mode, as is the inlet. In addition, we have modeled a small pendant to round off the whole design.

Please make sure that all layers have been printed properly. Otherwise there may be a leakage of water. If you have problems with this, then print the INLET without vase mode.

We’ve added the pendant as an STP file, so you can easily edit and customize it.

★ MOUNTING INSTRUCTIONS

• SEE PICTURES (GIF)

★ RECOMMEND PRINT-SETTINGS (Vase)

• Filament: Bambulab PLA Matte black (used in our make)

• Infill: 0% (Vasemode)

• Layer Height: 0.2mm

• Walls: 1

• Nozzle Size: 0.4mm

• Support Structure: None needed, ensuring a hassle-free printing process.

• Brim: None needed, but when you have adhesion problems than activate the brim

• Vasemode Settings  (Settings –> Other –> Spiral vase): Activate

★ RECOMMEND PRINT-SETTINGS (Inlet)

• Filament: Bambulab PLA Matte white (used in our make)

• Infill: 0% (Vasemode)

• Layer Height: 0.2mm

• Walls: 1

• Nozzle Size: 0.4mm

• Support Structure: None needed, ensuring a hassle-free printing process.

• Brim: None needed, but when you have adhesion problems than activate the brim

• Vasemode Settings  (Settings –> Other –> Spiral vase): Activate

★ PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)

• STL-FILES YOU WILL FIND HERE IN THE ATTACHEMENT

• PREDEFINED 3MF-FILES FOR BAMBU LAB PRINTER YOU CAN FIND IN THE ATTACHEMENT (COMING SOON)

• YOU CAN ALSO BUY THIS MODEL FOR PRIVATE USE UNDER THIS POST

YOU CAN PURCHASE A COMMERCIAL LICENSE HERE AND ALSO A LICENSE FOR PRIVATE USE WITH WHICH YOU CAN GET MORE PREMIUM MODELS (CLICK ME)

Best regards

Leon from Sektor 7 Studios

Please note: The STL files attached to this post may NOT be sold, listed for free, redistributed, posted to other platforms, or given away. For commercial use, an active subscription with us (Sektor 7 Studios) is required.