★ PREDEFINED PRINT PROFILES
Hello everyone 🙂
Easter is slowly approaching and we have modeled a few Easter designs again. We will be uploading new Easter designs every week from now on.
Today we want to present you our cute bunny with an amazing strucure.
The model can be scaled in the slicer and can be printed in single colour and multicolour 🙂
In the makes we add fuzzy skin to the contour of the 3d-model, that rounds off the whole design. 🙂 But you can also print them without fuzzy skin.
Happy printing 🙂
★ RECOMMEND PRINT-SETTINGS:
⭒ Filament: Bambulab PLA Matte brown, black, white (used in our make)
⭒ Infill: 15% Gyroid or Grid
⭒ Layer Height: 0.16mm
⭒ Walls: 2
⭒ Nozzle Size: 0.4mm
⭒ Support Structure: needed
⭒ Brim: None needed, but when you have adhesion problems than activate the brim
⭒ Fuzzy Skin Settings (Settings –> Other –> Fuzzy Skin): All Walls / Fuzzy skin point distance: 0,4mm / Fuzzy skin thickness: 0,2mm
★ STL-FILES & PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)
-
STL-FILES YOU WILL FIND IN THE ATTACHEMENT
-
PREDEFINED 3MF-FILES FOR BAMBU LAB PRINTER YOU CAN FIND HERE
Best regards
Leon from Sektor 7 Studios
