Hello everyone 🙂
We would finally like to introduce you to our Lamp “Tritor”. We designed it with great attention to detail.
Vase Tritor comes out the next days 🙂
★ WHAT DO YOU NEED?
You need only a standard E14-Socket. (for example this one: https://amzn.eu/d/cIyh6AD)
★ VARIANTS OF THE LAMPSHADE:
-
5 DIFFERENT LAMPSHADES INCLUDED ( YOU CAN ALSO FIND THEM HERE WITH PREDEFINED PRINT PROFILE: https://www.patreon.com/posts/121638770Â )
★ MOUNTING INSTRUCTIONS:
-
SEE PICTURES
★ RECOMMEND PRINT-SETTINGS (BASE):
-
Filament: Bambulab PLA Matte green & blue (used in our make)
-
Infill: 10% Gyroid or Grid
-
Layer Height: 0.2mm or 0,16mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: None needed, ensuring a hassle-free printing process.
-
Brim: None needed, but when you have adhesion problems than activate the brim
-
Optional: Fuzzy Skin Settings (Settings –> Other –> Fuzzy Skin:Â All Walls / Fuzzy skin point distance: 0,5mm / Fuzzy skin thickness: 0,3mm
-
In our Make we used no fuzzy skin
★ RECOMMEND PRINT-SETTINGS (LAMPSHADE HOLDER):
-
Filament: Bambulab PLA Matte white (used in our make)
-
Infill: 10% Gyroid or Grid
-
Layer Height: 0.2mm or 0,16mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: none needed
-
Brim: None needed, but when you have adhesion problems than activate the brim
★ RECOMMEND PRINT-SETTINGS (LAMPSHADE):
-
Filament: Bambulab PLA Matte white (used in our make)
-
Infill: 10% Gyroid or Grid
-
Layer Height: 0.2mm or 0,16mm
-
Walls: 2
-
Nozzle Size: 0.4mm
-
Support Structure: None needed, ensuring a hassle-free printing process.
-
Brim: None needed, but when you have adhesion problems than activate the brim
-
Optional: Fuzzy Skin Settings (Settings –> Other –> Fuzzy Skin):Â All Walls / Fuzzy skin point distance: 0,3mm / Fuzzy skin thickness: 0,2mm
-
In our Make we dont use fuzzy skin
-
Vasemode Settings  (Settings –> Other –> Spiral vase): Activate
★ STL-FILES & PREDEFINED PRINT PROFILES (MEMBERSHIP NEEDED)
Best regards
Leon from Sektor 7 Studios
