CREALITY K1 MAX RAISER / RISER / TOP COVER / UPGRADE (VERSION 2, WITH SWING-ARM)
Introducing the Ultimate Lid Extension for Your CREALITY K1 MAX 3D Printer in VERSION 2 WITH SWING-ARM! (no supports needed)
Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 MAX printer, designed to elevate your printing projects to the next level.
After the many requests to design a raiser for the K1 MAX, we complied and thought about how we could realise the raiser for the K1 Max.
GET STL-FILES ON CREALITY CLOUD
CREALITY K1 MAX RAISER / RISER / TOP COVER (UPGRADE) - VERSION 2 WITH SWING-ARM
OUR STL-FILES OFFERS YOU:
- Perfect Fit on Creality K1 Max
- Enhanced Functionality
- Improved Print Quality
- Easy Installation
- Noise reduction
- More moving space for the Bowden tube
- Air supply regulation & indirect control of the temperature
- Bowden tube passage to the back and side (you can choose)
- Detailed assembly instructions are supplied as a download
- Detailed print settings are supplied as a download
- More mobility of the filament tube and the power cable (no annoying slapping of the chain against the printer)
- Side filament outlet
- Filament sensor is located inside the raiser
THE FOLLOWING PARTS MUST BE PRINTED:
- PART_RAISER_K1-MAX_VERSION-2 (3 TIMES)
- PART_BACK-RIGHT_RAISER_SWING-ARM_K1-MAX_VERSION-2 (ONCE)
- SLIDER_K1-MAX (8 TIMES)
- CONTROLLER_WITH_LOGO_K1-MAX (8 TIMES) or CONTROLLER_WITHOUT_LOGO_K1-MAX (8 TIMES)
- GLASS_HOLDER_K1-MAX (ONCE)
- PLUG (1 OR 2 TIMES)
- PLUG_WITH_HOLDER (1 OR 2 TIMES)
- DRIVE-SHAFT (ONCE)
- HOLDER_SWING-ARM (ONCE)
- SWING-ARM (ONCE)
- SWING-ARM_CLIP (6 TIMES)
- BEARING-COVER_TOP (ONCE)
- BEARING-COVER_BOTTOM (ONCE)
- CABLE_CLIP_DOUBLE (2 – 3 TIMES)
- CABLE_CLIP_TRIPLE (3 – 5 TIMES)
- CABLE_SUPPORT (ONCE)
| Printing material | PLA / PLA+ / PETG / ABS / ASA (heat-resistant filaments are recommended, but not absolutely necessary) |
|---|---|
| Nozzle | 0,4 mm |
| Infill | 15% |
| Layer height | 0,2 mm |
| Walls | 2 |
| Support structure | none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing) |
| Recommendation | BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines) |
